Jura IMPRESSA XJ9 Professional Wartungshandbuch PDF herunterladen (Seite 37)

5 Maintenance

T Empty the other receptacle and place it under the cappuc-

cino frother again.

T Press the

‘Next’ button.

‘Milk system is being cleaned.’, the cappuccino frother and

the pipe are rinsed with fresh water.

‘Please select product:’ appears on the display.

T Carefully pull the cappuccino frother down and off.

T Dismantle the cappuccino frother into its individual parts.

T Rinse all parts of the cappuccino frother thoroughly under

running water.

T Reassemble the cappuccino frother.

E Ensure that all individual parts are correctly and firmly con-

nected to ensure correct operation of the cappuccino frother.

T Firmly attach it to the connector.

Your IMPRESSA no longer has to be descaled if you are using the

CLARIS Pro Blue filter cartridge. If the water hardness is 10°dH or more,

we recommend using the filter cartridge. If you do not know the

hardness of your water, you can find this out first (see Chapter 1 ‘Pre-

paring and using for the first time – Determining the water hard-

ness’).

If you did not activate the filter cartridge the first time you used the

machine, you can do this now as follows.

E Perform the ‘inserting the filter’ operation without any inter-

ruptions. This will ensure that your IMPRESSA always produces

its best.

Precondition:

‘Please select product:’ is displayed.

 O T Press the P button.

‘Maintenance status (1/6)’

 g T Turn the Rotary Switch until the programme item ‘Mainte-

nance settings (3/6)’

is displayed.

Dismantling and rinsing

the cappuccino frother

Inserting and activating

the filter

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 51 52

Keine Kommentare

Jura IMPRESSA XJ9 Professional Wartungshandbuch Seite 37